Ordering Recommendation

New York DOH Approval Status

This test is New York state approved.

Specimen Required

Patient Preparation
Collect

Random or 24-hour urine. Refrigerate during collection.

Specimen Preparation

Thoroughly mix entire collection, then, perform one of the two processing options below:
Option 1: Immediately after collection, adjust pH to 8-9 by adding 10 percent Na2CO3. Transfer 1 mL aliquot urine to an ARUP Standard Transport Tube. (Min: 0.5 mL)
Option 2: Immediately after collection, transfer a maximum of 4 mL urine to an ARUP Standard Transport Tube prefilled with Sodium Carbonate (ARUP)supply #48096). (Min: 0.5 mL) Available online through eSupply using ARUP Connect or contact ARUP Client Services at (800) 522-2787.

Storage/Transport Temperature

Refrigerated.

Unacceptable Conditions
Remarks
Stability

pH 8-9: Ambient: 4 hours; Refrigerated: 72 hours; Frozen: 1 month

Methodology

Quantitative Electrochemiluminescent Immunoassay

Performed

Sun-Sat

Reported

Within 24 hours

Reference Interval

0-1 mg/L

Interpretive Data

Patients with urine myoglobin greater than 15 mg/L are at risk of acute renal failure. Usual results are less than 1 mg/L. Results between 1 and 15 mg/L are associated with vigorous exercise, myocardial infarct, mild muscle injury, and other conditions.

This test was developed and its performance characteristics determined by ARUP Laboratories. It has not been cleared or approved by the US Food and Drug Administration. This test was performed in a CLIA certified laboratory and is intended for clinical purposes.

Compliance Category

Laboratory Developed Test (LDT)

Note

Hotline History

N/A

CPT Codes

83874

Components

Component Test Code* Component Chart Name LOINC
0020223 Myoglobin Urine 2641-9
* Component test codes cannot be used to order tests. The information provided here is not sufficient for interface builds; for a complete test mix, please click the sidebar link to access the Interface Map.

Aliases

  • Urine myoglobin
Myoglobin, Urine